top of page
Raised Access Flooring Pedestal Adhesive


Raised Access Flooring Pedestal Adhesive
Raised Access Flooring Pedestal Adhesive



Product Description


StarFix PED is a single component, moisture curing, adhesive that contains zero VOC’s and is solvent free. StarFix PED has been specially formulated for fixing the pedestals used in light to medium grade access flooring installations and has excellent adhesion to concrete and to most materials likely to be used in the access flooring industry.


Attributes and Benefits

    Superior adhesive properties
     Excellent adhesion to concrete and most other materials used in access flooring industry

    Unique, one component formulation
     One component product with no mixing needed before use

    Zero VOC content
     Does not contain any hazardous or flammable solvents

    Flexible, low foam formulation
     Ensures a more solid feel on installation than products that rely on foaming to gap fill

    Wide range of temperatures for application
     Can be used from temperatures as low as -5°C up to 35°C


    Cost effective product without any loss of performance benefits
     Reduced viscosity enables a large number of pedestals to be installed.



StarFix PED does not require mixing or stirring and can be spread using a knife, squeegee or, more often, by dipping the pedestal into the mix. The rheology of the product is designed to allow the correct amount, for a relatively flat floor, to be held on the pedestal when used in this manner. 

The material remains in a mobile, liquid form for approximately 4-5 hours, after which the material sets into a soft solid, getting progressively harder over a period of a few days. In ideal conditions pedestals can be subjected to the standard sand-bag test after 48 hours at 23°C. Full cure will take longer in cold temperatures. Tubs can be re-sealed and any skin formed should be removed. Product under the skin will be perfectly fit for use.



StarFix PED is supplied as a 9kg unit in a metal pail.


Handling and Storage

StarFix PED is classified as harmful by inhalation but is not classed as hazardous for transportation. Good standards of industrial hygiene should be observed when handling the material.  The use of protective gloves and tight fitting goggles are highly recommended. The recommendations made in the Health and Safety data sheet for this product should be observed at all times. StarFix PED contains 4,4’-Diphenylmethane diisocyanate and the advice contained in the Star Uretech Safety Data Sheet is of particular importance. Store in the original, unopened container at a temperature between 5°C and 25°C.


Technical Information



The condition of this product will determine the required method of disposal. Used containers with fully cured product remaining around the edges or bottom of the container should have the hazard label removed or obscured before disposal as general building waste. Uncured/Liquid product should be disposed of as hazardous waste.


Coverage Rates

When used correctly a typical rate of 300 to 340 pedestals per 9kg unit (approximately 28g per pedestal) should be expected. (Please note that coverage rate may vary with different substrates and application methods).



The order reference for StarFix PED is SF-TG1-9.0-00-3. A full pallet consists of 100 x 9kg units.


Download Documents

Please select a document to download:

    Technical Data Sheet

    Method Statement

    VOCs (LEED and BREEAM Compliance)

    2021 Update - Platform Floors (Raised Access Floors) MOB PF2/SPU

bottom of page