StarFix PED-PRO is a single component, moisture curing, adhesive that contains zero VOC’s and is solvent free. StarFix PED-PRO has been specially formulated for fixing the pedestals used in heavy grade access flooring installations and has excellent adhesion to concrete and to most materials likely to be used in the access flooring industry.
Attributes and Benefits
● Superior adhesive properties
Excellent adhesion to concrete and most other materials used in access flooring industry
● Unique, one component formulation
One component product with no mixing needed before use
● Zero VOC content
Does not contain any hazardous or flammable solvents
● High performance guaranteed
Passes T15 (horizontal load) and T42 (swing bag) testing after 48 hours
● Flexible, low foam formulation
Ensures a more solid feel on installation than products that rely on foaming to gap fill
● Wide range of temperatures for application
Can be used from temperatures as low as -5°C up to 35°C
StarFix PED-PRO does not require mixing or stirring and can be spread using a knife, squeegee or, more often, by dipping the pedestal into the mix. The rheology of the product is designed to allow the correct amount, for a relatively flat floor, to be held on the pedestal when used in this manner.
The material remains in a mobile, liquid form for approximately 4-5 hours, after which the material sets into a soft solid, getting progressively harder over a period of a few days. In ideal conditions pedestals can be subjected to the standard sand-bag test after 48 hours at 23°C. Full cure will take longer in cold temperatures. Tubs can be re-sealed and any skin formed should be removed. Product under the skin will be perfectly fit for use.
StarFix PED-PRO is supplied as a 9kg unit in a metal pail.
Handling and Storage
StarFix PED-PRO is classified as harmful by inhalation but is not classed as hazardous for transportation. Good standards of industrial hygiene should be observed when handling the material. The use of protective gloves and tight fitting goggles are highly recommended. The recommendations made in the Health and Safety data sheet for this product should be observed at all times. StarFix PED-PRO contains 4,4’-Diphenylmethane diisocyanate and the advice contained in the Star Uretech Safety Data Sheet is of particular importance. Store in the original, unopened container at a temperature between 5°C and 25°C.
The condition of this product will determine the required method of disposal. Used containers with fully cured product remaining around the edges or bottom of the container should have the hazard label removed or obscured before disposal as general building waste. Uncured/Liquid product should be disposed of as hazardous waste.
When used correctly a typical rate of 220 to 240 pedestals per 9kg unit (approximately 40g per pedestal) should be expected. (Please note that coverage rate may vary with different substrates and application methods).
The order reference for StarFix PED-PRO is SF- PA2-9.0-00-3. A full pallet consists of 100 x 9kg units.
Please select a document to download:
● Technical Data Sheet
● Method Statement
● VOCs (LEED and BREEAM Compliance)
● 2021 Update - Platform Floors (Raised Access Floors) MOB PF2/SPU